Click on the image to check the artwork
By certification 
WP-C series IP65 triproof light fixture
Our line of triproof light fixture are perfect for illuminating low bay environments such as workshops, garages, hallways, parking garages, and other indoor industrial spaces. They come with LED tubes(optional) and use less energy than traditional fluorescents. Choose from multiple color temperature options and a range of sizes between 2 feet and 4 or 5 feet long. Built tough with waterproof housing for wet conditions. Available with surface mounts, suspension kits, and retrofit kits for updating your current light fixtures.
Features
• IP65
• PC diffuser,ABS/PC base
• Steel gear tray
•Quick connector optional
•with or without LED tube
• Easy installation
• 3 years warranty
Options
• Function : on-off microwave sensor /through wiring
• Installation : Surface mounting/suspending
•Cable gland:PG9 or PG13.5,quick connector or common
Application
•Industry
•Warehouses
•Offices
•Supermarkets, DIY stores, electronics retailers, showrooms
Technical Parameter
Item No |
WP-C-118 |
WP-C-218 |
WP-C-136 |
WP-C-236 |
WP-C-158 |
WP-C-258 |
Rated Power |
9W |
18W |
18W |
36W |
24W |
48W |
Product size L*W*H(mm) |
670*100*110 |
670*160*110 |
1270*100*110 |
1270*160*110 |
1570*100*110 |
1570*160*110 |
Mounting distance(mm) |
405-395 |
405-395 |
905-895 |
905-895 |
970-960 |
970-960 |
Input voltage |
120-277V~ 50/60Hz |
|||||
PF |
＞0.9 |
＞0.9 |
＞0.9 |
＞0.9 |
＞0.9 |
＞0.9 |
Efficiency（LM/W） |
100 |
|||||
Lumen（LM） |
900 |
1800 |
1800 |
3600 |
2400 |
4800 |
CCT(K) |
4000K |
|||||
Beam angle |
120° |
|||||
CRI |
80 |
|||||
Ta/Tc (°C) |
40℃/70℃ |
|||||
Ambient Humidity |
0-95% |
|||||
Ambient Temperature（°C） |
-10~40 |
|||||
Storage Temperature（°C） |
-20~80 |
|||||
Driver type |
DOB |
|||||
Driver efficiency |
>90% |
|||||
IRF |
＞5% |
|||||
Certificates |
CE ROHS SAA UKAS ENEC CB |
|||||
Safety class |
Class I |
|||||
LED type |
SMD2835 |
|||||
LED chip brand |
SAN AN.Other brands optional |
|||||
Warranty |
3 years |
|||||
Lifespan |
30000 Hours |
|||||
IP class |
65 |
|||||
Installation |
Surface mounting/suspending |
|||||
Material |
ABS/PC base and PC clear diffuser,steel reflector |
|||||
Color consistency in level |
Max. 6 SDCM |
|||||
THD |
<15% |
|||||
Starting Time |
<0.5S |
|||||
Switching Cycle before Failure |
＞100 000 times |
|||||
Premature failure rate @1000h |
0 |
|||||
Lumen maintenance @6000h |
80% |
|||||
Product net weight(KG) |
1 |
1.2 |
1.5 |
1.8 |
1.8 |
2 |
Installation
a. ceiling mounting
Fix base section of the batten to the ceiling, Connect the AC power cable to the terminal block, either through the top or via the end cap.
B. Suspending
Connect the LED module to the base section with the two wire ropes to support the weight, Join the ends of the internal power cable together.
Lock the two halves together, match diffused led module together with gear tray base and then lock the clips to secure the batten.
http://www.ip65-led.com/
